Bearings, gears, small arms and jet engines require grinding, polishing, plating and laser cutting. The resulting metal dust cloud is combustible and explosible; aluminum, magnesium and titanium dusts release hydrogen (H₂) on contact with water, so firefighting with water can increase the explosion risk. NFPA 484 governs combustible-metal safety.

Metal Dust Properties

  • Aluminum dust: Kst 400–600 bar·m/s (Class ST3)
  • Magnesium dust: Kst about 508 bar·m/s (28 µm sample; NFPA 652 Table A.5.2.2(e)); keeps burning in contact with water
  • Titanium dust: can be pyrophoric; cloud ignition temperature is about 330-450 °C depending on the sample (NFPA 652 Table A.5.2.2(h))
  • Steel/iron dust: Kst 100–200 (ST1)
  • Minimum ignition energy (MIE): varies with metal and particle size; NFPA 652 Table A.5.2.2(h) shows cloud MIE of about 5 mJ for zirconium, 25 mJ for titanium, 40 mJ for magnesium and 50 mJ for aluminum; a static spark can be enough, so never take grounding lightly

Collection Systems

  • Wet collector: The required choice for aluminum/magnesium (dust captured by a water curtain)
  • Dry baghouse: OK for steel
  • Spark detection: IR + water mist
  • Grounding: bonding and grounding resistance below 1×106 Ω (NFPA 654 7.6.3, NFPA 652 9.4.7.1.3)
  • Central vacuum: All machines tied in

NFPA 484 Ventilation

  • Duct velocity: enough to keep dust from settling in the duct (NFPA 484 11.2.3.4); the NFPA 654 annex usually cites 4000 fpm (about 20 m/s) or higher
  • Deflagration venting: Av/V ratio calculated per NFPA 68
  • Explosion relief: vent closure weight must not exceed 12.2 kg/m² (2.5 lb/ft²) of free vent area (NFPA 68 9.2.6)

Field Practice

  • Grinder: Water tank beneath
  • Anodizing: Separate room + acid vent
  • Electrical: Zone 21 Ex tD motor
  • Cleaning: bulk dust is removed with conductive, nonsparking scoops and soft brooms or natural-fiber brushes (NFPA 484 9.4.3, 9.5.1); vacuums only for the small residual amount and, if portable, only if listed for the material (9.5.2, 9.6.4); compressed-air cleaning only under 9.7, at no more than 206 kPa (30 psi)
  • Fire gear: Class D metal extinguisher

Turkish Industry

  • Bearing plants: Steel grinding dust
  • Defense plants: Aluminum dust
  • Aerospace plants: Jet engine Ti dust
  • Integrated steel mills: Iron dust
  • Incidents: an aluminum-dust blast

Metal Dust with MEP Calc

MEP Calc sizes metal-dust plants: capture velocity flow, deflagration vent area and NFPA 484 wet collector.

Download MEP Calc on the App Store

SprinkCalc — Fire Sprinkler Design Across Three Standards

SprinkCalc covers hazard classification, design density and area, K-factor selection, water demand and hydraulic calculations for NFPA 13, FM Global and BS EN 12845 in a single iOS app, and exports a professional PDF report. One of the few tools that unifies all three major fire protection standards.

Download SprinkCalc on the App Store
Sources & Further Reading

NFPA 484, NFPA 654, NFPA 68, OSHA 1910, VDI 2263. NFPA 484 Combustible Metals.