Large glass and ceramic plants produce most of Turkey's more than 9 Mt/y of glass and ceramics. Glass kilns run at 1,600 °C and ceramic tunnels at 1,300 °C with natural-gas or oxy-fuel (95 percent O2) burners. NFPA 86 mandates a burner management system (BMS), pilot-flame supervision, a purge of at least four system volumes and oil-free cleaning of oxygen valves.

Kiln Types

  • Glass end-port: Regenerative 1,600 °C
  • Glass oxy-fuel: Low NOx
  • Ceramic tunnel: 1,300 °C 50-100 m
  • Electric melter: E-glass (glass fiber) and specialty glass
  • Float glass: Tin bath 1,100 °C

NFPA 86 BMS

  • Flame scanner: UV/IR pilot
  • Purge: at least 4 system volumes of fresh air or inert gas
  • Safety shut-off: Dual valve
  • High-temp limit: Upper cut-off
  • Manual reset: After trip

Oxy-Fuel Risk

  • O2 purity: 95-99 percent
  • O2 valve fire: No mineral oil
  • CGA G-4.1: O2 cleaning

Tunnel Kiln

  • Entry zone: 150 °C drying
  • Firing zone: 1,300 °C
  • Cooling zone: 100 °C
  • Wagon: Refractory

Turkey Plants

  • A large float glass plant: 1.8 Mt float
  • A glass plant: Soda glass
  • A large ceramic plant: 110 Mm2
  • Another ceramic plant: 60 Mm2
  • Regenerator maintenance incidents: Reminder of NFPA 86 purge-pilot compliance

MEP Calc — 110+ Engineering Calculators

MEP Calc bundles 110+ engineering modules in one iOS app: 21 fire calculations (sprinkler, fire pump, clean agent) plus heating, cooling, HVAC, plumbing, steam and natural gas. Download it on the App Store.

Download MEP Calc on the App Store

SprinkCalc — Fire Sprinkler Design Across Three Standards

SprinkCalc covers hazard classification, design density and area, K-factor selection, water demand and hydraulic calculations for NFPA 13, FM Global and BS EN 12845 in a single iOS app, and exports a professional PDF report. One of the few tools that unifies all three major fire protection standards.

Download SprinkCalc on the App Store
Sources & Further Reading

NFPA 86, NFPA 85, CGA G-4.1, FM DS 6-10, TS EN 746. NFPA 86 Ovens and Furnaces.