EV battery packs hold 400-800 V and 50-100 kWh. End-of-life packs are shredded for metal recovery, but damaged cells trigger thermal runaway, releasing HF gas. NFPA 855 governs energy-storage and battery-system fire protection.
Li-ion Chemistry
- NMC: Ni-Mn-Co cathode, 250 Wh/kg
- LFP: Iron phosphate, 160 Wh/kg, safer
- Electrolyte: LiPF6 + EC/DMC/EMC
- Thermal runaway: 80 C SEI, 130 C separator
- Off-gas: HF, CO, CO2, H2, hydrocarbons
Shredder Safety
- N2 inerting: O2 held below 4 percent
- Slurry shredder: Underwater shredding
- Pre-discharge: NaCl tank 48 h
- Scrubber: NaOH for HF washdown
- Speed: 25 rpm slow + 60 kW motor
NFPA 855 Requirements
- Battery unit: 600 kWh max per room
- Spacing: 910 mm rack gap
- Sprinkler: K=160 (11.2) 12.2 L/min/m2
- 2-hour firewall: Separation wall
- Gas detection: H2 25 percent LEL alarm
Thermal-Runaway Response
- Propagation test: UL 9540A cell level
- Mist system: Water mist + dispersant
- F-500 agent: Encapsulation
- Cooling time: 4-8 h
- Reignition watch: 24-48 h monitoring
Turkish Facility Examples
- Exitcom Bursa: 5,000 t/y Li-ion
- Togg Gemlik: Integrated production + recycling
- Regulation: Waste battery decree
- EU: Battery Regulation 2023/1542
- Black mass: Li/Co/Ni hydrometallurgy
MEP Calc — 86+ Engineering Calculators
MEP Calc bundles 86+ engineering modules in one iOS app: 21 fire calculations (sprinkler, fire pump, FM-200 clean agent) plus heating, cooling, HVAC, plumbing, steam and natural gas. Download it on the App Store.
Download MEP Calc on the App Store
SprinkCalc — Fire Sprinkler Design Across Three Standards
SprinkCalc covers hazard classification, design density and area, K-factor selection, water demand and hydraulic calculations for NFPA 13, FM Global and BS EN 12845 in a single iOS app, and exports a professional PDF report. One of the few tools that unifies all three major fire protection standards.
Download SprinkCalc on the App StoreNFPA 855, UL 9540A, NFPA 400, EU Battery Regulation, FM DS 5-33. NFPA 855 Energy Storage Systems.