Oil and gas pipelines use pigs (Pipeline Inspection Gauges) to clean or inspect the line. During pig firing (launch/receive) the launcher holds pressurized hydrocarbon and generates metallic friction sparks. A reported incident involved ignition while opening a pig receiver.

Pig Types

  • Cleaning pig: removes solid paraffin with scraper cups
  • Gauge pig: detects geometric anomalies
  • Smart pig: MFL/ultrasonic corrosion mapping
  • Sphere (top): liquid separation, gas line condensate

Launcher/Receiver Safety

  • Isolation valve: double block + bleed
  • Venting: safe location, flare or atmosphere
  • Purge: N2 or methanol before launch
  • Pressure gauge: verify 0 psi before opening
  • Earthing: launcher body grounded - dissipate static

Metallic Spark Risk

  • Pig metal part: worn scraper cups create friction sparks
  • Iron sulfide (FeS): pyrophoric - ignites in air
  • Iron sulfide control: per the NFPA 69 annex, deposits are kept wet or the vessel is kept inert; iron sulfide can ignite if air enters (NFPA 69, A.7.2.4.4)
  • MIE methane: 0.24 mJ - very low
  • Solution: N2-purge with pig, fill receiver with N2 first

API 1130 and NFPA 30

  • API 1130: pipeline leak detection - computational monitoring
  • NFPA 30: piping systems that transfer flammable and combustible liquids (Chapter 27); transportation of liquids governed by US transport regulations is outside its scope (1.1.2)
  • Area classification: the hazardous-area class and extent around a pig launcher or receiver is set site by site using the parameters of NFPA 497
  • Foam monitor: deluge over launcher/receiver area
  • PSSR: Pre-Startup Safety Review every pig campaign

MEP Calc — 110+ Engineering Calculators

MEP Calc bundles 110+ engineering modules in one iOS app: 21 fire calculations (sprinkler, fire pump, clean agent) plus heating, cooling, HVAC, plumbing, steam and natural gas. Download it on the App Store.

Download MEP Calc on the App Store

SprinkCalc — Fire Sprinkler Design Across Three Standards

SprinkCalc covers hazard classification, design density and area, K-factor selection, water demand and hydraulic calculations for NFPA 13, FM Global and BS EN 12845 in a single iOS app, and exports a professional PDF report. One of the few tools that unifies all three major fire protection standards.

Download SprinkCalc on the App Store
Sources & Further Reading

NFPA 30, API 1130, API RP 1165, ASME B31.4, B31.8, DOT 49 CFR Part 195. NFPA 30 Flammable Liquids standard.