Once rail and metro tunnels exceed 1 km with limited exits, egress suddenly becomes a life-critical issue. NFPA 130 (Fixed Guideway Transit and Passenger Rail Systems) provides the framework for emergency ventilation and evacuation times; the 2017 edition gives no design values for fixed fire fighting systems (FFFS) in the trainway. The notes below draw on large tunnel projects.

HRR Scenarios

  • Metro car: NFPA 130 Annex H reports full-scale tests with a single metro car reaching 35 MW (in 5 minutes) and 52.5 MW (in 2.3 minutes); the design fire is chosen per project

Longitudinal Ventilation

  • Critical velocity: the minimum airflow speed that prevents backlayering; no fixed value, it is set from the design fire and tunnel geometry (NFPA 130 3.3.12, 7.2.1)
  • Fans: selected to operate for at least 1 hour at the hot-air condition of the design fire; the fan inlet temperature may not be below 150°C (NFPA 130 7.3.2)
  • Portal fan: large fans at tunnel mouth

Water Mist FFFS

  • NFPA 130 (2017): gives no pressure, application rate, nozzle spacing or water reserve for fixed suppression in the trainway

Egress Route

  • Cross passage: when used in place of emergency exit stairs, cross passages connecting twin tubes are spaced at most 244 m (800 ft) apart (NFPA 130 6.3.1.5, 6.3.1.6)
  • Walkway: the unobstructed clear width of the egress path is graduated: 610 mm at the walking surface, 760 mm at 1575 mm height and 430 mm at 2025 mm height (NFPA 130 6.3.2.1)
  • Emergency light: at least 2.7 lx (0.25 ft-candle) at the walking surface of the trainway walkway during evacuation (NFPA 130 6.3.5.9)

International Examples

  • Channel Tunnel: 50.5 km, FFFS added after 1996 fire
  • An undersea rail tunnel: 13.6 km, FFFS + twin portal fans
  • An undersea road tunnel: 5.4 km, 2x2 lane road - NFPA 502
  • Gotthard Base Tunnel (Switzerland): 57 km, jet fans + fixed water spray

MEP Calc — 110+ Engineering Calculators

MEP Calc bundles 110+ engineering modules in one iOS app: 21 fire calculations (sprinkler, fire pump, clean agent) plus heating, cooling, HVAC, plumbing, steam and natural gas. Download it on the App Store.

Download MEP Calc on the App Store

SprinkCalc — Fire Sprinkler Design Across Three Standards

SprinkCalc covers hazard classification, design density and area, K-factor selection, water demand and hydraulic calculations for NFPA 13, FM Global and BS EN 12845 in a single iOS app, and exports a professional PDF report. One of the few tools that unifies all three major fire protection standards.

Download SprinkCalc on the App Store
Sources & Further Reading

NFPA 130, NFPA 502, PIARC Road Tunnel Guidelines, EN 45545 Fire Safety Rail. NFPA 130 Rail Transit standard.