Most of Turkey's primary + secondary aluminum output, which exceeds 900,000 t/y, comes from a few large plants. Molten Al is 680-750 °C; molten aluminum + water = steam explosion. NFPA 484 requires a molten metal hazard analysis (7.3) and clean, dry containers for molten metal (8.2.3.1); primary aluminum production is outside its scope (1.1.8). The foundry measures below are practice, not NFPA 484 requirements.

Molten Al Hazard

  • Temperature: 680-750 °C
  • Density: 2.37 g/cm3
  • With water: Steam explosion
  • Mg addition: Al-Mg alloys have a markedly higher ignition risk
  • Ignition: contaminated scrap can ignite easily

Casting Pit Protection

  • Pit base: Refractory concrete; no standing water
  • Drainage: Pit kept fully dry; no active drain line
  • Chamfered edge: directs metal in a controlled way during a spill

Scrap Charging

  • Charge rate: Slow, in bundles; no large batch at once
  • Dross skim: Two-handled, refractory-coated skimmer, with care

Degas and Dust

  • Rotary degasser: argon (Ar) or nitrogen (N2) injected into the melt
  • Dust collector: wet type (wet scrubber) preferred for combustible metal dust
  • Al KSt: about 415 bar·m/s, St3 explosion class

Turkey Casting

  • Largest plant: 470,000 t/y
  • Second-largest plant: 200,000 t/y
  • Mid-size plant: 50,000 t/y
  • Example incident: Scrap-charge fire
  • Defense industry: aluminum casting applications

MEP Calc — 110+ Engineering Calculators

MEP Calc bundles 110+ engineering modules in one iOS app: 21 fire calculations (sprinkler, fire pump, clean agent) plus heating, cooling, HVAC, plumbing, steam and natural gas. Download it on the App Store.

Download MEP Calc on the App Store

SprinkCalc — Fire Sprinkler Design Across Three Standards

SprinkCalc covers hazard classification, design density and area, K-factor selection, water demand and hydraulic calculations for NFPA 13, FM Global and BS EN 12845 in a single iOS app, and exports a professional PDF report. One of the few tools that unifies all three major fire protection standards.

Download SprinkCalc on the App Store
Sources & Further Reading

NFPA 484, AFS 20-91, OSHA 1910.269, TS EN 573. NFPA 484 Combustible Metals.