Modern underground car parks under malls and residences use impulse jet-fan ventilation instead of ducted systems. Ideal for low ceilings (2.2-2.5 m), large footprint (10,000 m2+) and congested duct routes. NFPA 88A covers the construction and protection of parking structures; for ventilation it only requires at least 300 L/min per m2 of mechanical ventilation in enclosed structures during normal operation (6.3.1). It gives no criteria for smoke zoning, jet-fan layout or CFD validation.

Jet Fan vs Ducted

  • Jet fan: ductless impulse under ceiling
  • Ducted: duct + diffuser, higher cost
  • Advantage: 40 cm ceiling saving
  • Disadvantage: CFD mandatory, complex airflow
  • Thrust: 50-100 N per fan (jet momentum)

CFD Design Criteria

  • Software: FDS, ANSYS Fluent, PHOENICS

Fan Layout

  • Nozzle direction: parallel to the airflow towards the exhaust shaft
  • Acceleration zone: ramp exits need attention

Exhaust and Make-up

  • Ventilation rate: NFPA 88A 6.3.1 requires at least 300 L/min per m2 (1 ft3/min per ft2) of mechanical ventilation in enclosed parking structures during normal operation.
  • Make-up air: ramp mouth, natural intake
  • Damper: zone isolation, coordinated mode

CO and Gas Detectors

  • Automation: BMS with VFD control

Jet fans with MEP Calc

MEP Calc computes jet-fan count, thrust, critical velocity, exhaust flow and NFPA 88A zoning for underground parking.

Download MEP Calc on the App Store

SprinkCalc — Fire Sprinkler Design Across Three Standards

SprinkCalc covers hazard classification, design density and area, K-factor selection, water demand and hydraulic calculations for NFPA 13, FM Global and BS EN 12845 in a single iOS app, and exports a professional PDF report. One of the few tools that unifies all three major fire protection standards.

Download SprinkCalc on the App Store
Sources & Further Reading

NFPA 88A, BS 7346-7, PIARC 2019, AIJ 2013. NFPA 88A Parking code.